Newly Arrival Copper Foil For Pcb Manufacturers - STD Standard Copper Foil – JM
Newly Arrival Copper Foil For Pcb Manufacturers - STD Standard Copper Foil – JM Detail:
The STD series is an IPC grade 1 copper foil intended for use as the outer layer of rigid boards. It is available in thicknesses ranging from a minimum 12 µm to a maximum ED copper foil thickness of 140 µm. This is the only ED copper foil available in the 105 µm and 140 µm thicknesses, making it ideal for boards designed as heat sinks or to conduct large electrical currents.
Features
● The treated foil in grey or red
● High peel strength
● Good etch ability
● Excellent adhesions to etching resist
● Excellent corrosion resistance
Typical application
● Phenolic
● Epoxy board
● CEM-1, CEM-3
● FR-4, FR-3
● This is our standard ED copper foil product with the longest history of use as an outer layer for rigid boards.
Surface quality
● 0 splices per coil
● Foil to have uniform colour, cleanliness and flatness
● No obvious pitting, pin holes or corrosion
● No surface defects such as creases, spots or lines
● Foil must be oil free and have no visible oil spots
Typical properties of High Temperature Elongation Copper Foil
Classification |
Unit |
Requirement |
Test Method |
|||||||
Nominal thickness |
Um |
12 |
18 |
25 |
35 |
70 |
105 |
IPC-4562A |
||
Area Weight |
g/m² |
107±5 |
153±7 |
228±7 |
285± 10 |
585± 20 |
870±30 |
IPC-TM-650 2.2.12.2 |
||
Purity |
% |
≥99.8 |
IPC-TM-650 2.3.15 |
|||||||
roughness |
Shiny side (Ra) |
սm |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
IPC-TM-650 2.3.17 |
|
Matte side(Rz) |
um |
≤6 |
≤8 |
≤10 |
≤10 |
≤15 |
≤20 |
|||
Tensile Strength |
R.T.(23°C) |
Mpa |
≥150 |
≥220 |
≥235 |
≥280 |
≥280 |
≥280 |
IPC-TM-650 2.4.18 |
|
Elongation |
R.T.(23°C) |
% |
≥2 |
≥3 |
≥3 |
≥4 |
≥4 |
≥4 |
IPC-TM-650 2.4.18 |
|
Resistivity |
Ω.g/m² |
≤0.17 |
≤0.166 |
≤0.162 |
≤0.16 2 |
≤0.162 |
≤0.162 |
IPC-TM-650 2.5.14 |
||
Peel Strength(FR-4) |
N/mm |
≥1.0 |
≥1.3 |
≥1.6 |
≥1.6 |
≥2.1 |
≥2.1 |
IPC-TM-650 2.4.8 |
||
Lbs/in |
≥5.1 |
≥6.3 |
≥8.0 |
≥11.4 |
≥11.4 |
≥11.4 |
||||
Pinholes & porosity |
Number |
|
No |
IPC-TM-650 2.1.2 |
||||||
Anti-oxidization |
R.T.(23°C) |
|
|
180 |
|
|||||
R.T.(200°C) |
|
|
60 |
Standard Width, 1295(±1)mm, Width range: 200-1340mm. May according to the customer request tailor.
Product detail pictures:
Related Product Guide:
During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of Newly Arrival Copper Foil For Pcb Manufacturers - STD Standard Copper Foil – JM , The product will supply to all over the world, such as: Doha, South Africa, Turin, We look forward to hearing from you, whether you are a returning customer or a new one. We hope you will find what you are looking for here, if not, please contact us immediately. We pride ourselves on top notch customer service and response. Thank you for your business and support!
By Megan from Monaco - 2018.06.30 17:29
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Muriel from Israel - 2018.12.11 11:26