OEM Supply Copper Foil 0.02 - STD Standard Copper Foil – JM
OEM Supply Copper Foil 0.02 - STD Standard Copper Foil – JM Detail:
The STD series is an IPC grade 1 copper foil intended for use as the outer layer of rigid boards. It is available in thicknesses ranging from a minimum 12 µm to a maximum ED copper foil thickness of 140 µm. This is the only ED copper foil available in the 105 µm and 140 µm thicknesses, making it ideal for boards designed as heat sinks or to conduct large electrical currents.
Features
● The treated foil in grey or red
● High peel strength
● Good etch ability
● Excellent adhesions to etching resist
● Excellent corrosion resistance
Typical application
● Phenolic
● Epoxy board
● CEM-1, CEM-3
● FR-4, FR-3
● This is our standard ED copper foil product with the longest history of use as an outer layer for rigid boards.
Surface quality
● 0 splices per coil
● Foil to have uniform colour, cleanliness and flatness
● No obvious pitting, pin holes or corrosion
● No surface defects such as creases, spots or lines
● Foil must be oil free and have no visible oil spots
Typical properties of High Temperature Elongation Copper Foil
Classification |
Unit |
Requirement |
Test Method |
|||||||
Nominal thickness |
Um |
12 |
18 |
25 |
35 |
70 |
105 |
IPC-4562A |
||
Area Weight |
g/m² |
107±5 |
153±7 |
228±7 |
285± 10 |
585± 20 |
870±30 |
IPC-TM-650 2.2.12.2 |
||
Purity |
% |
≥99.8 |
IPC-TM-650 2.3.15 |
|||||||
roughness |
Shiny side (Ra) |
սm |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
IPC-TM-650 2.3.17 |
|
Matte side(Rz) |
um |
≤6 |
≤8 |
≤10 |
≤10 |
≤15 |
≤20 |
|||
Tensile Strength |
R.T.(23°C) |
Mpa |
≥150 |
≥220 |
≥235 |
≥280 |
≥280 |
≥280 |
IPC-TM-650 2.4.18 |
|
Elongation |
R.T.(23°C) |
% |
≥2 |
≥3 |
≥3 |
≥4 |
≥4 |
≥4 |
IPC-TM-650 2.4.18 |
|
Resistivity |
Ω.g/m² |
≤0.17 |
≤0.166 |
≤0.162 |
≤0.16 2 |
≤0.162 |
≤0.162 |
IPC-TM-650 2.5.14 |
||
Peel Strength(FR-4) |
N/mm |
≥1.0 |
≥1.3 |
≥1.6 |
≥1.6 |
≥2.1 |
≥2.1 |
IPC-TM-650 2.4.8 |
||
Lbs/in |
≥5.1 |
≥6.3 |
≥8.0 |
≥11.4 |
≥11.4 |
≥11.4 |
||||
Pinholes & porosity |
Number |
|
No |
IPC-TM-650 2.1.2 |
||||||
Anti-oxidization |
R.T.(23°C) |
|
|
180 |
|
|||||
R.T.(200°C) |
|
|
60 |
Standard Width, 1295(±1)mm, Width range: 200-1340mm. May according to the customer request tailor.
Product detail pictures:
Related Product Guide:
Our enterprise since its inception, constantly regards product good quality as organization life, constantly improve production technology, strengthen merchandise high quality and continuously strengthen enterprise total good quality administration, in strict accordance with all the national standard ISO 9001:2000 for OEM Supply Copper Foil 0.02 - STD Standard Copper Foil – JM , The product will supply to all over the world, such as: Cairo, Thailand, Iran, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Victor Yanushkevich from Rome - 2017.01.28 19:59
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Zoe from Austria - 2018.09.21 11:44