Top Suppliers 1 Mil Copper Foil - STD Standard Copper Foil – JM
Top Suppliers 1 Mil Copper Foil - STD Standard Copper Foil – JM Detail:
The STD series is an IPC grade 1 copper foil intended for use as the outer layer of rigid boards. It is available in thicknesses ranging from a minimum 12 µm to a maximum ED copper foil thickness of 140 µm. This is the only ED copper foil available in the 105 µm and 140 µm thicknesses, making it ideal for boards designed as heat sinks or to conduct large electrical currents.
Features
● The treated foil in grey or red
● High peel strength
● Good etch ability
● Excellent adhesions to etching resist
● Excellent corrosion resistance
Typical application
● Phenolic
● Epoxy board
● CEM-1, CEM-3
● FR-4, FR-3
● This is our standard ED copper foil product with the longest history of use as an outer layer for rigid boards.
Surface quality
● 0 splices per coil
● Foil to have uniform colour, cleanliness and flatness
● No obvious pitting, pin holes or corrosion
● No surface defects such as creases, spots or lines
● Foil must be oil free and have no visible oil spots
Typical properties of High Temperature Elongation Copper Foil
Classification |
Unit |
Requirement |
Test Method |
|||||||
Nominal thickness |
Um |
12 |
18 |
25 |
35 |
70 |
105 |
IPC-4562A |
||
Area Weight |
g/m² |
107±5 |
153±7 |
228±7 |
285± 10 |
585± 20 |
870±30 |
IPC-TM-650 2.2.12.2 |
||
Purity |
% |
≥99.8 |
IPC-TM-650 2.3.15 |
|||||||
roughness |
Shiny side (Ra) |
սm |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
≤0.43 |
IPC-TM-650 2.3.17 |
|
Matte side(Rz) |
um |
≤6 |
≤8 |
≤10 |
≤10 |
≤15 |
≤20 |
|||
Tensile Strength |
R.T.(23°C) |
Mpa |
≥150 |
≥220 |
≥235 |
≥280 |
≥280 |
≥280 |
IPC-TM-650 2.4.18 |
|
Elongation |
R.T.(23°C) |
% |
≥2 |
≥3 |
≥3 |
≥4 |
≥4 |
≥4 |
IPC-TM-650 2.4.18 |
|
Resistivity |
Ω.g/m² |
≤0.17 |
≤0.166 |
≤0.162 |
≤0.16 2 |
≤0.162 |
≤0.162 |
IPC-TM-650 2.5.14 |
||
Peel Strength(FR-4) |
N/mm |
≥1.0 |
≥1.3 |
≥1.6 |
≥1.6 |
≥2.1 |
≥2.1 |
IPC-TM-650 2.4.8 |
||
Lbs/in |
≥5.1 |
≥6.3 |
≥8.0 |
≥11.4 |
≥11.4 |
≥11.4 |
||||
Pinholes & porosity |
Number |
|
No |
IPC-TM-650 2.1.2 |
||||||
Anti-oxidization |
R.T.(23°C) |
|
|
180 |
|
|||||
R.T.(200°C) |
|
|
60 |
Standard Width, 1295(±1)mm, Width range: 200-1340mm. May according to the customer request tailor.
Product detail pictures:


Related Product Guide:
Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for Top Suppliers 1 Mil Copper Foil - STD Standard Copper Foil – JM , The product will supply to all over the world, such as: Lisbon, Vancouver, Argentina, Due to good quality and reasonable prices, our products have been exported to more than 10 countries and regions. We are looking forward to cooperating with all customers from at home and abroad. Moreover, customer satisfaction is our eternal pursuit.

Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
